Stuck? support@mecway.com

Mecway

FEA

Recent Discussions

• Where are the CCX solver "Details ..." saved?

  112 views 5 comments 0 points Most recent by kennethfugate August 2022
• Change number of decimals in legend?

  50 views 1 comment 0 points Most recent by Victor August 2022
• Static pull test - odd/incorrect results depending on mesh density and boundary conditions

  500 views 19 comments 0 points Most recent by Victor August 2022
• Version 16.0

  441 views 2 comments 0 points Most recent by Sergio August 2022
• CCX 2.20 is out

  290 views 4 comments 0 points Most recent by prop_design August 2022
• Spider Beams API Help

  557 views 17 comments 0 points Most recent by cwharpe August 2022
• seismic non linear analysis.

  248 views 5 comments 0 points Most recent by disla August 2022
• GMSH Export - Physical Groups

  188 views 3 comments 0 points Most recent by Sergio July 2022
• Custom refinement may duplicate and merge nearby nodes

  92 views 4 comments 0 points Most recent by Victor July 2022
• Convergence with Compression Only Support

  215 views 3 comments 0 points Most recent by Victor July 2022
• 2d automesh from element edge selection

  272 views 6 comments 0 points Most recent by Tim_Gowing July 2022
• Static 2D - Analysis - Element Value - Member Axial Forces

  133 views 2 comments 0 points Most recent by J_Marc July 2022
• 1D (Beam) Bolted Connection

  675 views 6 comments 0 points Most recent by disla July 2022
• Thermal analysis combined to static stress analysis

  226 views 3 comments 0 points Most recent by disla July 2022
• Deformation Scale Not Locking in Modal Animation

  93 views 2 comments 0 points Most recent by prop_design July 2022
• gmsh not generating volume mesh

  1.5K views 16 comments 0 points Most recent by prop_design July 2022
• Radiative thermal heat transfer & Cavity

  281 views 8 comments 0 points Most recent by Victor July 2022
• Non-linear analysis of a masonry arch bridge

  1.5K views 52 comments 0 points Most recent by mmartin July 2022
• hide elements of single component

  146 views 5 comments 0 points Most recent by LRIGA July 2022
• Uniting Geometry for FEA

  233 views 3 comments 0 points Most recent by Sergio July 2022
• Perimeters and areas of open holes

  159 views 4 comments 0 points Most recent by disla July 2022
• Laminate, metal+reinforced resin

  180 views 2 comments 0 points Most recent by Johan_S July 2022
• Using frictionless supports with a bonded contact -- where not allowed?

  248 views 1 comment 0 points Most recent by Victor June 2022
• Analysing sheet metal structures

  423 views 5 comments 0 points Most recent by Sebastianmaklary June 2022
• Modeling gears and contact

  1.5K views 20 comments 0 points Most recent by Sebastianmaklary June 2022
• CCX solver and modal calculation

  676 views 21 comments 0 points Most recent by disla June 2022
• Nonlinear Dynamic + contact

  553 views 12 comments 0 points Most recent by disla June 2022
• DPI Scaling Override

  84 views 0 comments 0 points Started by prop_design June 2022
• Version 15 Beta

  1.1K views 23 comments 0 points Most recent by prop_design June 2022
• Modal analysis and partecipatign ratio

  278 views 6 comments 0 points Most recent by Victor June 2022