Stuck? support@mecway.com

Mecway

FEA

Recent Discussions

• Access the pdb from inside a script

  71 views 2 comments 0 points Most recent by RICYTEACH October 2020
• Torsion in 1D with general section properties

  95 views 0 comments 0 points Started by MichaelMalgin October 2020
• Get component name or material name from element number using python API

  124 views 4 comments 0 points Most recent by RICYTEACH October 2020
• Mortar contact ROCKS

  328 views 1 comment 0 points Most recent by Victor October 2020
• Import DXF files

  812 views 4 comments 0 points Most recent by Inq September 2020
• Adding centrifugal forces to dynamic non-linear

  110 views 3 comments 0 points Most recent by JohnM September 2020
• Pinned support

  251 views 4 comments 0 points Most recent by roberto_p September 2020
• Development of geometry

  284 views 5 comments 0 points Most recent by Mishal August 2020
• Getting past a buckling point

  127 views 0 comments 0 points Started by JohnM August 2020
• CCX APPCRASH in Windows

  317 views 16 comments 0 points Most recent by Sergio August 2020
• Combining solved models in Mecway

  128 views 1 comment 0 points Most recent by Sergio August 2020
• Batch solving in Mecway

  437 views 11 comments 0 points Most recent by jbmag August 2020
• Suggestions for modeling a flat plate

  145 views 2 comments 0 points Most recent by Victor August 2020
• rpalinka

  117 views 1 comment 0 points Most recent by Victor August 2020
• Meshing Techniques

  1.8K views 10 comments 0 points Most recent by andyecho August 2020
• Plastic analysis in CCX, time steps/convergence question

  224 views 6 comments 0 points Most recent by JSC August 2020
• Pre-stressed modal analysis

  282 views 13 comments 0 points Most recent by prop_design August 2020
• Fluid Mechanics Support

  405 views 5 comments 0 points Most recent by Victor August 2020
• Verification against ISO 10211:2017 thermal test cases

  553 views 8 comments 0 points Most recent by Victor August 2020
• Welding Simulation in Mecway

  440 views 7 comments 0 points Most recent by mkraska August 2020
• Saving RAM

  105 views 2 comments 0 points Most recent by Victor August 2020
• YouTube videos about Mecway

  916 views 13 comments 0 points Most recent by prop_design August 2020
• ccx error: shell normal in node ... is smaller than 1.e-10

  313 views 15 comments 0 points Most recent by prop_design August 2020
• Version 13 Beta

  1.7K views 26 comments 0 points Most recent by Victor August 2020
• Calculix (CCX) 2.17 is out

  448 views 5 comments 0 points Most recent by prop_design July 2020
• Transient Thermal Analysis - control heat generation by trigger

  155 views 2 comments 0 points Most recent by Clearline July 2020
• Position dependent loads

  119 views 1 comment 0 points Most recent by Victor July 2020
• Composite laminate

  382 views 10 comments 0 points Most recent by PF1 July 2020
• Tie causes material penetration

  101 views 2 comments 0 points Most recent by protontim July 2020
• Simple bolt modelling

  1.2K views 9 comments 0 points Most recent by MartinB July 2020