Stuck? support@mecway.com

Mecway

FEA

Recent Discussions

• Buckling Test - Request for Help

  292 views 7 comments 0 points Most recent by LHartley December 2022
• DXF input very hard

  157 views 1 comment 0 points Most recent by cwharpe December 2022
• CCX solver error - beam/shell elements share the same node

  243 views 13 comments 0 points Most recent by JRP December 2022
• Improving performance of CCX solver

  203 views 8 comments 0 points Most recent by Aftab November 2022
• Boundary condition error - node rotation - No rotational DOF

  96 views 2 comments 0 points Most recent by JRP November 2022
• Two nodes coupled deformation

  88 views 4 comments 0 points Most recent by JRP November 2022
• CAD package for editing/making FEA models

  986 views 30 comments 0 points Most recent by Sergio November 2022
• Query re Appropriate Restraints

  139 views 6 comments 0 points Most recent by LHartley November 2022
• Shell Model - Flexible Panel With Outer Frame

  196 views 7 comments 0 points Most recent by Victor November 2022
• Version 18.0

  683 views 10 comments 0 points Most recent by Victor November 2022
• Appreciation and gears

  116 views 0 comments 0 points Started by Sebastianmaklary November 2022
• Where did the solid geometry go?

  301 views 9 comments 0 points Most recent by disla November 2022
• Advice on mesh definition

  160 views 6 comments 0 points Most recent by JohnM November 2022
• Select faces by dimension

  88 views 2 comments 0 points Most recent by Sergio November 2022
• How to set up spring-mass modal vibration model?

  334 views 26 comments 0 points Most recent by Victor November 2022
• Possible to prevent stress calcs in modal analysis?

  171 views 13 comments 0 points Most recent by prop_design October 2022
• Torsion constant of Rectangular Tube

  163 views 4 comments 0 points Most recent by cwharpe October 2022
• x6 difference in displacement between internal solver and CCX (beams+shells)?

  254 views 17 comments 0 points Most recent by prop_design October 2022
• Version 17.0

  436 views 4 comments 0 points Most recent by Victor October 2022
• Improvement Suggestions for Mecway

  127 views 1 comment 0 points Most recent by Victor October 2022
• Line2 - Beam - parameters needed for stress calculations

  122 views 4 comments 0 points Most recent by JMF11 October 2022
• Contour plot -- Greyscale gradient seems wrong

  129 views 6 comments 0 points Most recent by disla October 2022
• Moment load applied on shell

  88 views 2 comments 0 points Most recent by Victor October 2022
• Radial stiffness of PreCalibrated Bushings ( Wöhler - Curve; W-N curve )

  431 views 17 comments 0 points Most recent by disla October 2022
• MYSTRAN/NASTRAN Support

  137 views 0 comments 0 points Started by FEA_Stress October 2022
• Assigned custom colors for contour plot are not correctly displayed

  229 views 14 comments 0 points Most recent by dculp October 2022
• Beam elements using CCX solver

  250 views 4 comments 0 points Most recent by Victor October 2022
• 3D meshing -- How is "Maximum element size" determined?

  602 views 7 comments 0 points Most recent by disla October 2022
• Bolted Joint Representation

  425 views 2 comments 0 points Most recent by disla October 2022
• Error: Problem opening temporary files

  84 views 3 comments 0 points Most recent by Victor October 2022