Stuck? support@mecway.com

Mecway

FEA

Recent Discussions

• Does scaling matter for analysis?

  248 views 3 comments 0 points Most recent by DaveStupple January 2025
• Analysis of loads on a composite wings

  180 views 0 comments 0 points Started by aclouston January 2025
• Solver Mystran

  417 views 4 comments 0 points Most recent by kennethfugate January 2025
• OpenRadioss 3DNLG-1_Elastic_large_deflection

  275 views 2 comments 0 points Most recent by disla January 2025
• Nodes From Old Geometry Appear in Analysis

  140 views 2 comments 0 points Most recent by pberry December 2024
• Compression only material

  574 views 12 comments 0 points Most recent by cwharpe December 2024
• Stresses @ the int.Point visualization

  213 views 6 comments 0 points Most recent by disla December 2024
• Gmsh Custom Commands

  218 views 3 comments 0 points Most recent by UGMENTALCASE December 2024
• Model visual check

  329 views 5 comments 0 points Most recent by disla December 2024
• Can't see the Tools -> Labs -> OpenRadioss in trial version?

  184 views 3 comments 0 points Most recent by Victor December 2024
• Setting up a cementitious model with pre-tensioned cable without a duct

  159 views 2 comments 0 points Most recent by Bcavender December 2024
• Interesting behavior importing step-file

  234 views 3 comments 0 points Most recent by apadzak December 2024
• Soft_Coupling_with_Rotations

  171 views 1 comment 0 points Most recent by disla November 2024
• Clamping Force

  308 views 6 comments 0 points Most recent by UGMENTALCASE November 2024
• Shock Response Spectrum - Is there a workaround?. CCX Forum

  242 views 4 comments 0 points Most recent by disla November 2024
• Nodal Stress Calculation - Average over Adjacent Elements of the Same Material Only

  169 views 3 comments 0 points Most recent by Victor November 2024
• It would be better to add "show, show all, hide all but this" functions to the "Named Selections"

  120 views 1 comment 0 points Most recent by Sergio November 2024
• Bolted connections (with initial slip)

  352 views 4 comments 0 points Most recent by disla November 2024
• rolling a strip into circular shape

  172 views 3 comments 0 points Most recent by disla November 2024
• A Case for Load Cases / Folders

  829 views 15 comments 0 points Most recent by Husesset November 2024
• Improvement for next versions of Mecway

  1K views 19 comments 0 points Most recent by MikeMcMullen November 2024
• DIsplacement+rotation constrain in points(nodes)

  302 views 10 comments 0 points Most recent by disla October 2024
• Replace Step File in Working Mecway Model?

  251 views 4 comments 0 points Most recent by attila_vallyon October 2024
• spiky mesh after calculation.

  413 views 17 comments 0 points Most recent by Fatmac October 2024
• Can Mecway output strain results when using shell element?

  155 views 2 comments 0 points Most recent by runinwind October 2024
• Non-linear truss analysis

  346 views 8 comments 0 points Most recent by JohnM October 2024
• Spindle Bearing Simulation

  531 views 3 comments 0 points Most recent by Steffen October 2024
• Unexpected Reaction force on shell elements.

  139 views 2 comments 0 points Most recent by Victor October 2024
• Installation problem

  172 views 4 comments 0 points Most recent by Victor October 2024
• Spring, mass, damper tutorial

  227 views 2 comments 0 points Most recent by disla October 2024