Stuck? support@mecway.com

Mecway

FEA

Recent Discussions

• Three point bending

  297 views 4 comments 0 points Most recent by Phillip February 2018
• Hydrostatic load - CCX

  337 views 3 comments 0 points Most recent by Tim_Gowing February 2018
• Configurations - Thermal results to static structural analysis

  261 views 3 comments 0 points Most recent by Victor February 2018
• CCX 2.13

  3K views 50 comments 0 points Most recent by Andrea February 2018
• How model truss with "rigid" welded clusters, external moments and consider beam-column effects?

  230 views 2 comments 0 points Most recent by SandpointDave February 2018
• Pressure Mapping from CSV file to element set

  285 views 3 comments 0 points Most recent by Victor January 2018
• How create an RGB?

  335 views 5 comments 0 points Most recent by Andrea January 2018
• ERROR - Index was outside the bounds of array

  436 views 4 comments 0 points Most recent by Victor January 2018
• GPU requirement

  215 views 1 comment 0 points Most recent by Victor January 2018
• New Configuration from Old One

  186 views 1 comment 0 points Most recent by Andrea January 2018
• CCX .frd unable to ope in Mecway

  429 views 8 comments 0 points Most recent by Sergio January 2018
• Calculix:Initial Conditions

  930 views 17 comments 0 points Most recent by Victor January 2018
• Calculix tutorial crash

  307 views 1 comment 0 points Most recent by sebih January 2018
• Optimal Settings for Internal Solver

  1.3K views 3 comments 0 points Most recent by Roli January 2018
• Impressed with Mecway

  437 views 2 comments 0 points Most recent by SteveMelton January 2018
• Default names for named selection

  132 views 0 comments 0 points Started by Sergio January 2018
• Rigid body and moment

  695 views 4 comments 0 points Most recent by Kaspars January 2018
• Rayleigh damping causing problem

  481 views 8 comments 0 points Most recent by Victor January 2018
• Skipping initial data in dynamic simulation

  228 views 4 comments 0 points Most recent by Sergio January 2018
• CCX contact - value for friction stick slope and slope of pressure overclosure curve

  595 views 2 comments 0 points Most recent by Roli January 2018
• Can't seem to add a hole

  129 views 2 comments 0 points Most recent by UGMENTALCASE January 2018
• Importing partioning mesh

  370 views 9 comments 0 points Most recent by Victor January 2018
• Exporting stress linearization result table

  252 views 3 comments 0 points Most recent by Sergio January 2018
• Inconsistent results between full 3D (360 deg.) and one-quadrant (90 deg.) models in dynamic 3D

  166 views 2 comments 0 points Most recent by suktan January 2018
• Impact but no visible stresses

  309 views 3 comments 0 points Most recent by Victor January 2018
• CCX Post processing problem

  565 views 11 comments 0 points Most recent by Sergio January 2018
• Multiple curves in timeline and zoom-in/out capability

  123 views 2 comments 0 points Most recent by suktan January 2018
• Contact Issues

  558 views 8 comments 0 points Most recent by Victor December 2017
• How to make your own build of ccx ?

  216 views 2 comments 0 points Most recent by swaraj December 2017
• simulating a bolt tension using different teperature

  379 views 4 comments 0 points Most recent by Hengre December 2017