Stuck? support@mecway.com

Mecway

FEA

Recent Discussions

• Transient simulation in Dynamic Response 3D Analysis

  237 views 2 comments 0 points Most recent by suktan September 2017
• Negative von Mises stress

  1.3K views 1 comment 0 points Most recent by Victor September 2017
• Netgen documentation/tutorials

  598 views 3 comments 0 points Most recent by Sergio September 2017
• CPU scaling in Mecway/CCX

  859 views 5 comments 0 points Most recent by Sergio September 2017
• Flexible Joint on Beam

  286 views 3 comments 0 points Most recent by Victor September 2017
• Critically damped cantilever beam

  257 views 1 comment 0 points Most recent by Victor August 2017
• Pausing/Saving Partial Simulation

  463 views 9 comments 0 points Most recent by protontim August 2017
• Multiple selection

  153 views 1 comment 0 points Most recent by Victor August 2017
• Rigid link

  384 views 1 comment 0 points Most recent by Victor August 2017
• extra edges

  273 views 2 comments 0 points Most recent by johnhcole August 2017
• Running *CENTRIF in CCX and using Mecway for postprocessing

  676 views 9 comments 0 points Most recent by Victor August 2017
• Constraint to model interference fit?

  1.1K views 12 comments 0 points Most recent by Rusticus August 2017
• symmetry boundary condition

  729 views 7 comments 0 points Most recent by Rusticus August 2017
• Failure criterion - CCX versus internal solver

  255 views 2 comments 0 points Most recent by Rusticus August 2017
• "Deep" (non-surface) selection of elements

  349 views 5 comments 0 points Most recent by Rusticus August 2017
• Neuber stress correction

  255 views 1 comment 0 points Most recent by Victor August 2017
• Joining more mesh

  563 views 10 comments 0 points Most recent by Andrea August 2017
• Concrete slab

  441 views 2 comments 0 points Most recent by szicsa August 2017
• Non linear CCX Analysis - Bilinear isotropic hardening

  572 views 5 comments 0 points Most recent by marco August 2017
• Non linear time step

  330 views 7 comments 0 points Most recent by Sergio August 2017
• Option to keep results outside .liml file?

  183 views 2 comments 0 points Most recent by Sergio August 2017
• After a bit of guidance please

  377 views 7 comments 0 points Most recent by UGMENTALCASE August 2017
• ZZS improved stress

  332 views 8 comments 0 points Most recent by Victor August 2017
• Message error in inhomogeneous boundary conditions

  149 views 4 comments 0 points Most recent by Victor July 2017
• Bug in offset shells with position-dependent displacement direction

  91 views 0 comments 0 points Started by Victor July 2017
• second-order mesh

  161 views 2 comments 0 points Most recent by suktan July 2017
• Support for Newton milimeters units

  121 views 4 comments 0 points Most recent by Victor July 2017
• Sinergy with CGX! Is it possible?

  120 views 1 comment 0 points Most recent by Sergio July 2017
• 3D all Hex local refinement

  122 views 2 comments 0 points Most recent by German July 2017
• Spring on nodes

  304 views 4 comments 0 points Most recent by marco July 2017