Stuck? support@mecway.com

Mecway

FEA

Recent Discussions

• Are resulting stresses in global or element coordinate system; especially Line3 element?

  255 views 4 comments 0 points Most recent by Victor March 2018
• Non-Uniform Pressure distribution

  292 views 1 comment 0 points Most recent by German February 2018
• Maximum number of boundary conditions

  313 views 4 comments 0 points Most recent by simon February 2018
• Error in solving static 3D problem with CCx

  307 views 4 comments 0 points Most recent by Victor February 2018
• Different contact application

  254 views 2 comments 0 points Most recent by Abhijit_G_Patil February 2018
• Bonded contact for parts in CAD assembly

  769 views 8 comments 0 points Most recent by Abhijit_G_Patil February 2018
• Beam element + torsion

  291 views 2 comments 0 points Most recent by azr285 February 2018
• Three point bending

  292 views 4 comments 0 points Most recent by Phillip February 2018
• Hydrostatic load - CCX

  327 views 3 comments 0 points Most recent by Tim_Gowing February 2018
• Configurations - Thermal results to static structural analysis

  250 views 3 comments 0 points Most recent by Victor February 2018
• CCX 2.13

  3K views 50 comments 0 points Most recent by Andrea February 2018
• How model truss with "rigid" welded clusters, external moments and consider beam-column effects?

  228 views 2 comments 0 points Most recent by SandpointDave February 2018
• Pressure Mapping from CSV file to element set

  279 views 3 comments 0 points Most recent by Victor January 2018
• How create an RGB?

  332 views 5 comments 0 points Most recent by Andrea January 2018
• ERROR - Index was outside the bounds of array

  433 views 4 comments 0 points Most recent by Victor January 2018
• GPU requirement

  212 views 1 comment 0 points Most recent by Victor January 2018
• New Configuration from Old One

  183 views 1 comment 0 points Most recent by Andrea January 2018
• CCX .frd unable to ope in Mecway

  425 views 8 comments 0 points Most recent by Sergio January 2018
• Calculix:Initial Conditions

  914 views 17 comments 0 points Most recent by Victor January 2018
• Calculix tutorial crash

  293 views 1 comment 0 points Most recent by sebih January 2018
• Optimal Settings for Internal Solver

  1.2K views 3 comments 0 points Most recent by Roli January 2018
• Impressed with Mecway

  433 views 2 comments 0 points Most recent by SteveMelton January 2018
• Default names for named selection

  128 views 0 comments 0 points Started by Sergio January 2018
• Rigid body and moment

  687 views 4 comments 0 points Most recent by Kaspars January 2018
• Rayleigh damping causing problem

  473 views 8 comments 0 points Most recent by Victor January 2018
• Skipping initial data in dynamic simulation

  228 views 4 comments 0 points Most recent by Sergio January 2018
• CCX contact - value for friction stick slope and slope of pressure overclosure curve

  570 views 2 comments 0 points Most recent by Roli January 2018
• Can't seem to add a hole

  127 views 2 comments 0 points Most recent by UGMENTALCASE January 2018
• Importing partioning mesh

  366 views 9 comments 0 points Most recent by Victor January 2018
• Exporting stress linearization result table

  247 views 3 comments 0 points Most recent by Sergio January 2018