Stuck? support@mecway.com

Mecway

FEA

Recent Discussions

• ZZs1 plot with cyclic symmetry

  288 views 2 comments 0 points Most recent by Victor October 2019
• Static Brazilian disk test

  566 views 11 comments 0 points Most recent by pebli_hardi September 2019
• Mecway or LISA

  3.3K views 6 comments 0 points Most recent by JohnM September 2019
• Mass participation factors

  177 views 1 comment 0 points Most recent by Victor September 2019
• Reading modified FRD-Files into Mecway models

  425 views 4 comments 0 points Most recent by Victor September 2019
• Topology Optimization and Adaptative Refinement

  215 views 0 comments 0 points Started by fernandezpelayo September 2019
• Simple 2D analysis

  236 views 4 comments 0 points Most recent by DaveStupple September 2019
• Membrane elements Calculix

  383 views 1 comment 0 points Most recent by Victor September 2019
• Nodal supports 6 DOF

  140 views 4 comments 0 points Most recent by Victor September 2019
• Integration of MAC/GMC into CalculiX

  322 views 3 comments 0 points Most recent by barmin September 2019
• Having component name in the results table

  119 views 1 comment 0 points Most recent by Victor September 2019
• Pardiso Dynamic

  856 views 3 comments 0 points Most recent by VMH August 2019
• Output files

  227 views 1 comment 0 points Most recent by Victor July 2019
• Plated structures and shell elements

  436 views 8 comments 0 points Most recent by Andrea July 2019
• Labs and Type of Solver

  251 views 1 comment 0 points Most recent by JohnM July 2019
• PC Compatability

  468 views 5 comments 0 points Most recent by Hengre July 2019
• Meshing with shell elements

  3.3K views 33 comments 0 points Most recent by Andrea July 2019
• Reduced integration

  170 views 3 comments 0 points Most recent by German July 2019
• Axisymmetric element edge selection

  252 views 6 comments 0 points Most recent by Victor July 2019
• Displacement time varying

  341 views 6 comments 0 points Most recent by Victor June 2019
• ERROR_STR(%) Mecway Output using CCX

  577 views 3 comments 0 points Most recent by Victor June 2019
• Curve generator suggestion

  124 views 1 comment 0 points Most recent by Victor June 2019
• Composites analysis and modelling

  1.2K views 11 comments 0 points Most recent by VMH June 2019
• Tutorials in video

  267 views 5 comments 0 points Most recent by German June 2019
• Bonded contact

  390 views 5 comments 0 points Most recent by Victor June 2019
• tri3 element error for Static 3D analysis type

  251 views 2 comments 0 points Most recent by JRP June 2019
• Pressure Distributions for Aerodynamic Surfaces

  596 views 6 comments 0 points Most recent by Victor June 2019
• Check Duplicate Element

  493 views 3 comments 0 points Most recent by Victor June 2019
• Best practice for modeling thin wall square vessels

  286 views 3 comments 0 points Most recent by badbunny June 2019
• Bug with constraint equations and internal solver

  296 views 4 comments 0 points Most recent by Victor June 2019