Stuck? support@mecway.com

Mecway

FEA

Recent Discussions

• Fluid Mechanics Support

  486 views 5 comments 0 points Most recent by Victor August 2020
• Verification against ISO 10211:2017 thermal test cases

  649 views 8 comments 0 points Most recent by Victor August 2020
• Welding Simulation in Mecway

  553 views 7 comments 0 points Most recent by mkraska August 2020
• Saving RAM

  140 views 2 comments 0 points Most recent by Victor August 2020
• YouTube videos about Mecway

  962 views 13 comments 0 points Most recent by prop_design August 2020
• ccx error: shell normal in node ... is smaller than 1.e-10

  396 views 15 comments 0 points Most recent by prop_design August 2020
• Version 13 Beta

  1.8K views 26 comments 0 points Most recent by Victor August 2020
• Calculix (CCX) 2.17 is out

  482 views 5 comments 0 points Most recent by prop_design July 2020
• Transient Thermal Analysis - control heat generation by trigger

  203 views 2 comments 0 points Most recent by Clearline July 2020
• Position dependent loads

  148 views 1 comment 0 points Most recent by Victor July 2020
• Composite laminate

  476 views 10 comments 0 points Most recent by PF1 July 2020
• Tie causes material penetration

  122 views 2 comments 0 points Most recent by protontim July 2020
• Simple bolt modelling

  1.4K views 9 comments 0 points Most recent by MartinB July 2020
• custom beam section?

  178 views 1 comment 0 points Most recent by Mishal June 2020
• Extruding question and 3D mesh

  321 views 2 comments 0 points Most recent by Jalal June 2020
• Beam element stress output question

  1.2K views 18 comments 0 points Most recent by JRP June 2020
• Library list order

  146 views 1 comment 0 points Most recent by Victor June 2020
• Plastic GPS aircraft panel dock

  273 views 3 comments 0 points Most recent by JohnM June 2020
• Is there a way to lock and unlock a node position?

  116 views 2 comments 0 points Most recent by JohnM June 2020
• Importing Mesh in Mecway From Salome

  2.2K views 17 comments 0 points Most recent by MMK66 June 2020
• Top and bottom stresses comparison for a simply supported beam (1D, 2D & 3D)

  379 views 2 comments 0 points Most recent by wolland May 2020
• Failure Safety Factor

  276 views 3 comments 0 points Most recent by Victor May 2020
• Max shear stress on shell eles

  257 views 3 comments 0 points Most recent by Victor May 2020
• Contact Convergence -- Solver Window

  368 views 4 comments 0 points Most recent by cwharpe May 2020
• drop test of a battery case

  215 views 2 comments 0 points Most recent by rwhirley May 2020
• select faces of shell elements on one side only

  247 views 3 comments 0 points Most recent by Victor May 2020
• CalculiX ccx non-linear axisymmertic static problem, strange results, normal?

  2.1K views 14 comments 0 points Most recent by flowwolf May 2020
• Replacing Parts with Point Mass in an Assembly

  225 views 3 comments 0 points Most recent by Victor May 2020
• Line pressure representation.

  187 views 2 comments 0 points Most recent by Olalleitor May 2020
• Fatigue Analysis with MecWay

  1.1K views 7 comments 0 points Most recent by Olalleitor May 2020