Stuck? support@mecway.com

Mecway

FEA

Recent Discussions

• Mortar contact ROCKS

  388 views 1 comment 0 points Most recent by Victor October 2020
• Import DXF files

  857 views 4 comments 0 points Most recent by Inq September 2020
• Adding centrifugal forces to dynamic non-linear

  128 views 3 comments 0 points Most recent by JohnM September 2020
• Pinned support

  304 views 4 comments 0 points Most recent by roberto_p September 2020
• Development of geometry

  300 views 5 comments 0 points Most recent by Mishal August 2020
• Getting past a buckling point

  142 views 0 comments 0 points Started by JohnM August 2020
• CCX APPCRASH in Windows

  349 views 16 comments 0 points Most recent by Sergio August 2020
• Combining solved models in Mecway

  144 views 1 comment 0 points Most recent by Sergio August 2020
• Batch solving in Mecway

  485 views 11 comments 0 points Most recent by jbmag August 2020
• Suggestions for modeling a flat plate

  178 views 2 comments 0 points Most recent by Victor August 2020
• rpalinka

  159 views 1 comment 0 points Most recent by Victor August 2020
• Meshing Techniques

  2.3K views 10 comments 0 points Most recent by andyecho August 2020
• Plastic analysis in CCX, time steps/convergence question

  277 views 6 comments 0 points Most recent by JSC August 2020
• Pre-stressed modal analysis

  343 views 13 comments 0 points Most recent by prop_design August 2020
• Fluid Mechanics Support

  476 views 5 comments 0 points Most recent by Victor August 2020
• Verification against ISO 10211:2017 thermal test cases

  607 views 8 comments 0 points Most recent by Victor August 2020
• Welding Simulation in Mecway

  538 views 7 comments 0 points Most recent by mkraska August 2020
• Saving RAM

  130 views 2 comments 0 points Most recent by Victor August 2020
• YouTube videos about Mecway

  951 views 13 comments 0 points Most recent by prop_design August 2020
• ccx error: shell normal in node ... is smaller than 1.e-10

  388 views 15 comments 0 points Most recent by prop_design August 2020
• Version 13 Beta

  1.8K views 26 comments 0 points Most recent by Victor August 2020
• Calculix (CCX) 2.17 is out

  471 views 5 comments 0 points Most recent by prop_design July 2020
• Transient Thermal Analysis - control heat generation by trigger

  192 views 2 comments 0 points Most recent by Clearline July 2020
• Position dependent loads

  134 views 1 comment 0 points Most recent by Victor July 2020
• Composite laminate

  457 views 10 comments 0 points Most recent by PF1 July 2020
• Tie causes material penetration

  113 views 2 comments 0 points Most recent by protontim July 2020
• Simple bolt modelling

  1.4K views 9 comments 0 points Most recent by MartinB July 2020
• custom beam section?

  173 views 1 comment 0 points Most recent by Mishal June 2020
• Extruding question and 3D mesh

  305 views 2 comments 0 points Most recent by Jalal June 2020
• Beam element stress output question

  1.1K views 18 comments 0 points Most recent by JRP June 2020