Stuck? support@mecway.com

Mecway

FEA

Recent Discussions

• Bonded Contact in Nonlinear Static 3D

  389 views 2 comments 0 points Most recent by protontim September 2015
• Calculating force on isolators under a room

  190 views 1 comment 0 points Most recent by Victor September 2015
• Quad4 vs. Quad8 and Quad8 vs. Tet10 in Bending

  8.8K views 15 comments 0 points Most recent by [Deleted User] September 2015
• sagging cable

  452 views 4 comments 0 points Most recent by barrti August 2015
• Shell and Solid Element Results Plot

  232 views 2 comments 0 points Most recent by VMH August 2015
• Load Distribution at Link Plate hole Comparison

  353 views 1 comment 0 points Most recent by VMH August 2015
• deflection of plate on elastic support (zigzag?)

  1K views 17 comments 0 points Most recent by J_Marc August 2015
• Error P4

  260 views 2 comments 0 points Most recent by Jim_C August 2015
• Trunnion Test using Quadratic Triangle Shell Elements (Tri6)

  411 views 5 comments 0 points Most recent by VMH August 2015
• compression only support on curved face

  1.1K views 4 comments 0 points Most recent by rhoka August 2015
• Static Axisymmetric - Non isotropic mechanical properties?

  216 views 1 comment 0 points Most recent by Victor August 2015
• reaction force at symmetric modeling

  276 views 2 comments 0 points Most recent by rhoka August 2015
• Mesh Generation Fails

  410 views 8 comments 0 points Most recent by Victor August 2015
• Stress are way to low

  418 views 5 comments 0 points Most recent by protontim August 2015
• Connecting Surfaces

  499 views 2 comments 0 points Most recent by CMZA July 2015
• Mecway FEA Test Examples

  1.2K views 3 comments 0 points Most recent by [Deleted User] July 2015
• Elements on top of each other

  127 views 1 comment 0 points Most recent by Victor July 2015
• Distribute Floor Load/Pressure to Frame

  440 views 3 comments 0 points Most recent by VMH July 2015
• Lattice frame with angle beam (L sections).

  316 views 4 comments 0 points Most recent by J_Marc July 2015
• 250 000 tet10 elements causing any issues?

  141 views 2 comments 0 points Most recent by VMH July 2015
• Changing the Legend Scale

  123 views 1 comment 0 points Most recent by Victor July 2015
• Get Mecway running - no visible model

  204 views 2 comments 0 points Most recent by veto June 2015
• Bonded Contact Usage

  1.3K views 11 comments 0 points Most recent by VMH June 2015
• Tangential Load for a Cylinder

  275 views 1 comment 0 points Most recent by Victor June 2015
• Node selection methods

  1.9K views 3 comments 0 points Most recent by Victor June 2015
• Mecway on Mac OSX using VirtualBox

  664 views 3 comments 0 points Most recent by J_Marc June 2015
• Comparison between 3D Beam and Laminate Plate

  496 views 6 comments 0 points Most recent by eric_c June 2015
• Beam / Truss usage

  493 views 3 comments 0 points Most recent by Victor June 2015
• Large strain and contact in the future

  433 views 8 comments 0 points Most recent by johnkent May 2015
• Contact Stress

  269 views 1 comment 0 points Most recent by Victor May 2015