Discussions

• 2d automesh from element edge selection

  189 views 6 comments 0 points Most recent by Tim_Gowing July 2022
• Axisymmetric heat transfer - Thermal contact resistance

  112 views 2 comments 0 points Most recent by Tim_Gowing April 2020
• Point mass and rigid body in CCX

  297 views 5 comments 0 points Most recent by Tim_Gowing March 2019
• Shell offset - modal vibration

  135 views 2 comments 0 points Most recent by Tim_Gowing March 2019
• Memory, renumbering and out of core solving

  119 views 2 comments 0 points Most recent by Tim_Gowing March 2019
• Default component - where do newly created elements collect (once Default has been deleted)?

  111 views 2 comments 0 points Most recent by Tim_Gowing March 2019
• Quasi-static angular acceleration

  387 views 4 comments 0 points Most recent by Tim_Gowing September 2018
• Strain energy density

  242 views 2 comments 0 points Most recent by Tim_Gowing March 2018
• Stress results in cylindrical coordinate system

  929 views 11 comments 0 points Most recent by Andrea April 2018
• Hydrostatic load - CCX

  327 views 3 comments 0 points Most recent by Tim_Gowing February 2018
• Configurations - Thermal results to static structural analysis

  252 views 3 comments 0 points Most recent by Victor February 2018
• keyboard shortcut for 'select nodes (or element) by number'

  200 views 2 comments 0 points Most recent by Tim_Gowing June 2017
• Thermal contact resistance

  329 views 4 comments 0 points Most recent by Tim_Gowing September 2016
• Applied pressure and traction to vary with Z dimension - Silo analysis

  475 views 7 comments 0 points Most recent by Tim_Gowing August 2016
• Circle selection tool - Selection of element faces within a cylindrical hole

  177 views 3 comments 0 points Most recent by Sergio June 2016
• Model - Rotate - Drag with the middle button -- Centre of rotation

  175 views 2 comments 0 points Most recent by Tim_Gowing June 2016
• CCX 3-node beam *BEAM GENERAL SECTION,MATERIAL=EL,ELSET=Eall,SECTION=PIPE

  683 views 2 comments 0 points Most recent by Tim_Gowing June 2016
• View results for individual components within assembly model - ccx contact results

  333 views 6 comments 0 points Most recent by Tim_Gowing May 2016
• No contour plot showing for CCX results

  456 views 4 comments 0 points Most recent by Tim_Gowing May 2016
• Creation of CCX *SPRING

  315 views 1 comment 0 points Most recent by Victor March 2016