Stuck? support@mecway.com

Mecway

FEA

Recent Discussions

• Negative von Mises stress

  1.3K views 1 comment 0 points Most recent by Victor September 2017
• Netgen documentation/tutorials

  629 views 3 comments 0 points Most recent by Sergio September 2017
• CPU scaling in Mecway/CCX

  882 views 5 comments 0 points Most recent by Sergio September 2017
• Flexible Joint on Beam

  300 views 3 comments 0 points Most recent by Victor September 2017
• Critically damped cantilever beam

  273 views 1 comment 0 points Most recent by Victor August 2017
• Pausing/Saving Partial Simulation

  474 views 9 comments 0 points Most recent by protontim August 2017
• Multiple selection

  180 views 1 comment 0 points Most recent by Victor August 2017
• Rigid link

  403 views 1 comment 0 points Most recent by Victor August 2017
• extra edges

  292 views 2 comments 0 points Most recent by johnhcole August 2017
• Running *CENTRIF in CCX and using Mecway for postprocessing

  703 views 9 comments 0 points Most recent by Victor August 2017
• Constraint to model interference fit?

  1.2K views 12 comments 0 points Most recent by Rusticus August 2017
• symmetry boundary condition

  767 views 7 comments 0 points Most recent by Rusticus August 2017
• Failure criterion - CCX versus internal solver

  277 views 2 comments 0 points Most recent by Rusticus August 2017
• "Deep" (non-surface) selection of elements

  377 views 5 comments 0 points Most recent by Rusticus August 2017
• Neuber stress correction

  277 views 1 comment 0 points Most recent by Victor August 2017
• Joining more mesh

  599 views 10 comments 0 points Most recent by Andrea August 2017
• Concrete slab

  475 views 2 comments 0 points Most recent by szicsa August 2017
• Non linear CCX Analysis - Bilinear isotropic hardening

  589 views 5 comments 0 points Most recent by marco August 2017
• Non linear time step

  344 views 7 comments 0 points Most recent by Sergio August 2017
• Option to keep results outside .liml file?

  199 views 2 comments 0 points Most recent by Sergio August 2017
• After a bit of guidance please

  384 views 7 comments 0 points Most recent by UGMENTALCASE August 2017
• ZZS improved stress

  340 views 8 comments 0 points Most recent by Victor August 2017
• Message error in inhomogeneous boundary conditions

  162 views 4 comments 0 points Most recent by Victor July 2017
• Bug in offset shells with position-dependent displacement direction

  99 views 0 comments 0 points Started by Victor July 2017
• second-order mesh

  175 views 2 comments 0 points Most recent by suktan July 2017
• Support for Newton milimeters units

  130 views 4 comments 0 points Most recent by Victor July 2017
• Sinergy with CGX! Is it possible?

  146 views 1 comment 0 points Most recent by Sergio July 2017
• 3D all Hex local refinement

  140 views 2 comments 0 points Most recent by German July 2017
• Spring on nodes

  321 views 4 comments 0 points Most recent by marco July 2017
• Shell elements

  266 views 2 comments 0 points Most recent by Johan_S July 2017