Comments

• for what it is worth, I realized I did not send my most up to date model. Attached now. Thanks again for your help. jhc

  in Contact element overlap Comment by johnhcole October 2017
• Hi Sergio, thanks for your help. Okay then, 1x is the test. I had bee looking at a higher magnification. I usually lower the default magnification. I lowered the magnification to 10x and saw a much slighter overlap. I agree, when I look at 1x …

  in Contact element overlap Comment by johnhcole October 2017
• I will try the uncompressed file again; didn't work. Maybe the file is too big. jhc

  in Contact element overlap Comment by johnhcole October 2017
• I had trouble uploading the file so I am attempting that again. jhc I got an error message: no data could be found in your post. I will try a compressed file. jhc

  in Contact element overlap Comment by johnhcole October 2017
• Hi Andrea, thank you for your help. Are you indicating frictionless support for the quarter model is the same as Z=0 and Y=0 at the appropriate sections? And am I to understand 3D elements don't have rotational freedom? The two pressures: (1) t…

  in Mirror Symmetry Questions Comment by johnhcole October 2017
• Oops. here is the file.

  in Mirror Symmetry Questions Comment by johnhcole October 2017
• Thank you Victor. I appreciate your help. I will learn both approaches. jhc

  in extra edges Comment by johnhcole August 2017