Comments

• The book https://www.amazon.es/Steel-Connection-Analysis-Paolo-Rugarli-ebook/dp/B079VSGMD8/ref=sr_1_12?qid=1703078116&refinements=p_27:Paolo+Rugarli&s=books&sr=1-12

  in CBFEM for steel connections Comment by jvrajadell December 2023
• Idea Statica is not the only software that does CBFEM analysis. The first was the Italian software https://www.steelchecks.com/connections/whatis.asp Then came Idea Statica and spanish https://info.cype.com/es/software/cype-connect/ and the german h…

  in CBFEM for steel connections Comment by jvrajadell December 2023
• Hello how can I get spooles or pardiso for multithreading? thanks

  in Mecway13 and Multi-threaded CCX Comment by jvrajadell April 2021
• has the MT-version of SPOOLES  been compiled? I've 1cpu for spooles again, and I wrote all possible enviroment variables

  in Version 7.0 released Comment by jvrajadell April 2017
• batch file but now it's running with 2.12 CCX_MT ,  ALL WITH 8 CPUS !!!!!! )

  in number of treads with CCX Comment by jvrajadell April 2017
• I've  NUMBERS_OF_PROCESSORS too How Mecway with Calculix 2.12 has problems with buckling, I'm using Mecway7 but with bConverged Calculix 2.10 I'm trying to simulate a material with parabolic stress-strain curve, now I don't need buckling, I'm …

  in number of treads with CCX Comment by jvrajadell April 2017
•   In my PC it doesn't work too many enviroment variable... OMP_NUM_THREADS CCX_NPROC_EQUATION_SOLVER CCX_NPROC_STIFFNESS

  in number of treads with CCX Comment by jvrajadell April 2017
• thanks

  in number of treads with CCX Comment by jvrajadell April 2017
• Can it run for symmetric stiffness/mass contributions with more than 1 cpu? Now it can run with 8 cpu for stress calculation and spooles solver but one for symmetric stiffness/mass contributions

  in number of treads with CCX Comment by jvrajadell April 2017
• My test steel ancorage concrete foundation pad NL contact analysis principal concrete stresses (Mohr Coulomb) (1) red points: MECWAY 7 Beta 3, ccx_MT, steel NL, only compression concrete (2) green points:MECWAY 7 Beta 3, c…

  in Version 7 beta Comment by jvrajadell April 2017
• but, only in slave surfaces?

  in Extract forces on contact surfaces Comment by jvrajadell February 2017
• I want say Number of cores with CCX

  in number of treads with CCX Comment by jvrajadell November 2016
• it doesn't say that it's possible buckling with beams in 3D, sorry

  in Delete point constrains, rot constrain, buckling 3D with frames Comment by jvrajadell February 2014