Comments

• attachment

  in Rotating Shaft with spline end Comment by UGMENTALCASE October 2016
• Hi guys, back again! So I'm working on the first link example above. So I see we fit this diameter piece on the end which acts like the rotation device (if you will), is that correct? Could some one help me out as to why we have that as the sam…

  in Rotating Shaft with spline end Comment by UGMENTALCASE October 2016
• Thank you very much i'll have a read of those posts and see. That's what i started thinking about, modelling the other half of the parts. I could do, and try that could look into both ways. Thanks again for the help :-)

  in Rotating Shaft with spline end Comment by UGMENTALCASE October 2016
• Cheers

  in Rotating Shaft with spline end Comment by UGMENTALCASE October 2016
• How do I get things working to check plastic deformation? Is it using CCX on it's own or can I do it through Mecway and selecting CCX as the solver? Cheers

  in Repeated Use Comment by UGMENTALCASE October 2016
• Hi, yes i meant the same force in the same place being done over and over again. So say with a clamp like described. Say i wanted to use it 15 times a day, for 1 week. I use a torque setting so I apply the same force of clamping each time (in real l…

  in Repeated Use Comment by UGMENTALCASE October 2016
• You guys are amazing!!!!!

  in Meshing help Comment by UGMENTALCASE October 2016
• Tried all sorts but now getting the ngmesh.exe failure. Just comes up as stopped working. I'll have to try a number of other things, not sure what though! :-)

  in Computation cost, space and Solver error definitions. Comment by UGMENTALCASE September 2016
• Sorry to jump on this thread but I keep getting a p-2 memory error which trying to mesh. I have 32GB of RAM in my laptop and a monitor on it and it's not even passing 20% usage when I get the P-2 error, is there something I can change to help stop t…

  in Computation cost, space and Solver error definitions. Comment by UGMENTALCASE September 2016
• Awesome thanks guys, I'll export stp from now on. Thanks again for your time

  in After a bit of help..... I'm a noooooooooooooooooob!!!! Comment by UGMENTALCASE September 2016
• I've attached the actual plate. So I've brought in the igs file (this may be the issue) also tried it with a .stp file as well. And assigned my material, and I've got a red material in the tree now, and when you check the 'what's wrong' I get 'The…

  in After a bit of help..... I'm a noooooooooooooooooob!!!! Comment by UGMENTALCASE September 2016