Comments

• Thanks Victor for the clarification.

  in Interpretation of the reaction forces Comment by ddraht February 2
• Thank you for creating regular updates. The program is simply great. :-) However, I would still like the bonded display, otherwise I have no way of recognizing the link. Best regards

  in Version 15 Beta Comment by ddraht May 2022
• Top :-)

  in Library of Steel Beam Sections according to EN. Comment by ddraht February 2022
• Ignore my last comment. -- IT WORKS :-) with all loads and constaints. Modal solver with 13 natural frequency. 279440 Elements and 583772 Nodes. With the CCX-PARDISO solver it works 13 minutes on my laptop Precision 5560. Thats perfectly. Thank y…

  in CCX solver and modal calculation Comment by ddraht February 2022
• Hallo, I have add the PERTURBATION parameter to the *STEP but now theres an error: *ERROR in u_calloc: error allocating memory variable=eme, file=arpack.c, line=380, num=739872144, size=8 Do you have a ideas whats wrong?

  in CCX solver and modal calculation Comment by ddraht February 2022
• If you like you can calculate the model by yourself --Downloadlink--

  in CCX solver and modal calculation Comment by ddraht February 2022
• @Victor. The same problem had dculp --see here-- Therefor I wrote 1e15 Pa/m elastic support in bonded contact. The text is red and the message "whats wrong" called "Elastic ist not allowed with this analysis type". But the solver works. I hope…

  in CCX solver and modal calculation Comment by ddraht February 2022
• Dear disla, thanks for the comprehensive report. I check the issues step bye step. But the thing is, the mecway internal solver works fine and given a solution and the CCX solver can’t start and failed? Best regards Dieter

  in CCX solver and modal calculation Comment by ddraht February 2022
• It don't work with TIE too

  in CCX solver and modal calculation Comment by ddraht February 2022
• @Sergio, TX, I try ist..

  in CCX solver and modal calculation Comment by ddraht February 2022
• If you like, you can download the model data. https://joest.dataservice.zone/f/18c7f42fe23a4d90a472/

  in CCX solver and modal calculation Comment by ddraht February 2022
• Note: the calculation with the internal solver works, but takes a long time, app12h.

  in CCX solver and modal calculation Comment by ddraht February 2022
• Ok, TX Victor, I try it

  in Elements overlap each other.. Comment by ddraht April 2016