JJJ

About

Username
JJJ
Joined
Visits
39
Last Active
Roles
Member

Comments

  • No sólo para un ingeniero civil. Fíjate Cypeconnect... se amplían muchísimo las opciones disponibles.
    in NON-LINEAR BEHAVIOUR OF SHELLS Comment by JJJ 9:55AM
  • Hi @Fernando this software is under development. It is impressive how they have implemented in a couple weeks, the time I follow this project. The nicest is that also you can work on a browser. I recomend you to send the files where you have problem…
    in OPEN CAD STUDIO Comment by JJJ 8:23AM
  • @Victor Very good news, to know that you are thinking about to include Code Aster as an option. An industry recognised software, be possible one of the most (if not the most) on the Open Source world. OOFEM is a software implemented in NextFEM. Open…
    in NON-LINEAR BEHAVIOUR OF SHELLS Comment by JJJ July 14
  • Hi Victor, could you see this question I did? On the other hand, CODE-ASTER is a recognised software in industry. I don´t know how it works, but are you thinking that Mecway could be a pre and post processor for that?
    in NON-LINEAR BEHAVIOUR OF SHELLS Comment by JJJ July 13
  • Thank you very much. It is solved: I copied the adresses of the Starter and the Engine, but has to by defined clicking on the button Find OpenRadioss root directory. Thanks for your support.
    in Problem with OpenRadioss Comment by JJJ June 29
  • Thank you very much Victor. Can you please recomend how to define this by the GUI? On the other hand, I have moedeled from 0, and doesn´t work. I think could be possible because the OpenRadioss release, I tried to download the recomended on the Me…
    in Problem with OpenRadioss Comment by JJJ June 27
  • Hi Mike, Thank you very much for your reply. I didn´t commented this, but now that you say is possible to be the solution, the analysis is running in a competer but no on another. I am going to check if that is the reason. 3J
    in Problem with OpenRadioss Comment by JJJ June 26
  • Hi Victor, Thank you very much for your reply, and of course sincerity. Bad news from you about that... I need to work with stainless in some projects, and as you know the Ramberg-Osgood model is the material law to be considered. Aditional options…
    in NON-LINEAR BEHAVIOUR OF SHELLS Comment by JJJ June 25
  • @Andrea you can find standars related to these topics (RMI in USA, EN 15512, EN 15635 in Europe). For seismic parameters, you should follow the national codes. Depending on the type of profile, could be necessary an specific type of analysis; I mean…
    in dynamic response on steel frame Comment by JJJ May 1
  • Hi @Fatmac, thank you very much for your response. About the geometry, I understand that geometry can´t be changed/adapted in Mecway. But what about the case where I have an edge included on a surface, and I want that nodes from both surfaces will b…
    in Geommetry preparation capabilities in Mecway Comment by JJJ March 21
Avatar

Howdy, Stranger!

It looks like you're new here. If you want to get involved, click one of these buttons!

Sign In Register