Stuck? support@mecway.com

Mecway

FEA

1. Mecway 34

   

   by disla · October 25

   constraints to be released". It is not in version 34.

2. Bridge between Mecway and Code-Aster

   

   by KundertdeWit · October 22

   It has been added to version 2026.4, which is available now

3. Bridge between Mecway and Code-Aster

   

   by Sergio · October 15

   @KundertdeWit and @Mishal thanks for this efforts! I´m running in Mecway v34, so maybe you could update the requeriments and add this version too.

4. Natrual frequency inconsistancies

   

   by sofien_73 · October 15

   I Mishal I'd seen the same problem on steel frame analysis for a complex one so I've modeled the simpliest cantilever beam with a concentred mass and I had the same kind of result between Mecway inter

5. Surface integral in 2D models

   

   by Victor · October 14

   I'll add that for the next version.

6. Bridge between Mecway and Code-Aster

   

   by Fatmac · October 11

   examples, neat. So far I have only being using version 34 of MW, and for the supplied examples it all appears to work just fine. However, I have run into some errors when I build my own models within

7. Siemens closes OpenRadioss

   

   by Mishal · October 8

   Does the July version have the fixed issues regarding the beam elements?

8. Mecway 34

   

   by Victor · October 4

   This is currently a release candidate so it has a higher risk of new bugs. If no serious bugs are found, it will be promoted to a stable release, otherwise it will be superseded by version 35.

9. Siemens closes OpenRadioss

   

   by Victor · October 2

   Version 20260120 with source and Windows binaries is here https://mecway.com/download/

10. Changes in the way MW visualizes external forces

    

    by Fatmac · September 22

    I've been using 2.23 with MW recently and have not seen any real issues, but recently I realise that MW deals with external forces slightly differently with 2.23 than with previous versions. I freque

11. OpenRadioss - Cannot run starter

    

    by Jozsef · August 26

    I have Mecway 28 and would like to try OpenRadioss. Unfortunately, older OpenRadioss binaries are no longer available on GitHub, so I downloaded the OpenRadioss version currently linked on the Mecway

12. Changing model in mid-simulation

    

    by kuhl · August 18

    Google says the english version of that message is "KeyNotFoundException"

13. OpenRadioss - Error reading .thy file

    

    by Victor · July 15

    Sorry about that but thanks for reporting the bug. I've identified it and it will be fixed in the next version (34).

14. Problems with cyclic symmetry in a tank analysis

    

    by rafaelpovoa · July 8

    Ohh, ive corrected that in a previous version, let me find it and attach here soon as possible. Sorry

15. Beam Truss connection. CalculiX Guitub/issue/#164. Previous transform card solution.

    

    by disla · June 11

    I'm using last (Ccx v2.23\Compiled ccx_MKL.exe version)

16. How to connect/weld parallel Beam Elements (unifilar model) without shared nodes?

    

    by marcosprojetos · May 12

    Interface Issues: My version does not show 'Properties' in the component right-click menu, making it difficult to switch from Line to Beam.

17. dynamic response on steel frame

    

    by sofien_73 · April 29

    Maybe it could be fixed for the next version of MECWAY.

18. Mecway and ABAQUS Compared to ASME PTB-3

    

    by ahjiuhdotcom · April 14

    Hi @Sergio, can you share again the project file you shared in Oct 2021? I am trying to reproduce the same tutorial, using the static axisymmetric (Mecway version 33), I got the error "No solid e

19. Using Mystran inside Mecway

    

    by Sergio · April 9

    Hi Victor, would be great if the postprocessor view show the solver and version used, now that there is Mecway/CalculiX/OpenRadioss/Mystran available that could be a usefull information.

20. Using Mystran inside Mecway

    

    by Fatmac · April 9

    that was it - i had pointed to a version i downloaded from the mystan website -mystran-17.0.0-windows-x86_64.exe, it ran but only the displacements were displayed, now i have gone back to the version