apadzak

About

Username
apadzak
Joined
Visits
289
Last Active
Roles
Member

Comments

  • Hi All! Victor, I have tried another file which can be analyzed with MW and CCX, I have chosen CadAssembly. CCX wasn't able to solve as in the Pipe Clip example. I have selected exporting solution to CSV and only MW is able to do it, CCX didn't gene…
    in Calculix Solver Doesn't Display Results Comment by apadzak March 2016
  • Hi Victor, Thanks for your message. Sorry for late reply, I was away, now I should be quicker with answers. I couldn't find .frd file, whole folder is attached. Result tree don't display the table. There is something what I ignored before but in the…
    in Calculix Solver Doesn't Display Results Comment by apadzak March 2016
  • Hi VHM, thanks for your post. As I said, I have two operating systems on one PC, one is experimental another one clean. On both of them I have Mecway 2,3,4 installed and 2.8 bConverged CalculiX. On experimental system, Mecway behaves as expected, wh…
    in Calculix Solver Doesn't Display Results Comment by apadzak March 2016
  • Great news!
    in Mecway on Linux Comment by apadzak November 2015
  • Thank you Victor!
    in Version 4.0 released Comment by apadzak November 2015
  • Hi Victor, is there any chance to create some kind of refresh button for viewing results. I was just excluding components visibility to look closer in to certain regions of a simulation and they would disapear from the result window after running th…
    in WISH LIST Comment by apadzak August 2015
  • Hi rhoka, I didn't mean to be ironic, sorry if you felt that I was. I was just trying to stress that as long as you create easily readable iso fields which you can distinguish one from another then it's good enough. The three examples you have sho…
    in WISH LIST Comment by apadzak August 2015
  • Hi rhoka, to me the most important are results, numbers, colours are just representation of isofields and they should be clear and practical in use. Creo Simulate is very bright as well and has got great capabilities, I think there is no one who spe…
    in WISH LIST Comment by apadzak August 2015
  • Hi Victor, I have just started tweaking the model of the airplane fuselage I showed you the other day and it is quite annoying to figure out nodal constraints. This model has got connection bars between skin and beams etc. and I had to use extra con…
    in WISH LIST Comment by apadzak August 2015
  • Yes I meant just range of stress field visible through the body and rest of the body would be transparent. With complicated geometry it can be laborious to find out this hot spot so transparent body would do a job perfectly.
    in WISH LIST Comment by apadzak May 2015
  • Victor, thank you for the slider in the results, quick and efficient way to view just interested field values. Is there a chance to view this values through the model instead just surface view? It works for Reaction Force so I believe there shoud be…
    in WISH LIST Comment by apadzak May 2015
  • Thank you very much for help. I will apply the changes and see what it brings. Merry Christmas. apadzak
    in Forming a concrete tank with steel removable and non removable sheets... Comment by apadzak December 2014
  • Another thing that could have been added is changing color of components when "Visible" is selected - similar to loads and constraints suppressing, this element would grayed out. Few materials in one model is fine but more will extend search what i…
    in WISH LIST Comment by apadzak December 2014
  • Can free version be used commercially :> ?
    in demo version Comment by apadzak December 2014
  • Two useful things that could make my life easier (hopefully others as well). Circular selection changes pattern when zoomed in and out and if it stayed in the position I would be able to choose close sat nodes by just zooming in to one of the patter…
    in WISH LIST Comment by apadzak December 2014
  • Hi Victor, Temperature dependent properties in thermal analysis is veru usefull but as we know the temperature changes stress/shock resistance of the material as well. This could be useful. Composites get brittle within quite low amplitude of temper…
    in WISH LIST Comment by apadzak August 2014
  • There is another test case with Reference Values from NAFEMS, but it's not NAFEMS documentation so there could be an argue if this is true. http://www.compassis.com/downloads/Manuals/Validation/RamSeries_ValidTest_18_OK.pdf Mecway got very close to …
    in WISH LIST Comment by apadzak August 2014
  • Thank you Victor.
    in WISH LIST Comment by apadzak August 2014
  • Please have a look at this CASE: http://fobos-project.ru/abqdoc611/Documentation/docs/v6.11/books/bmk/default.htm?startat=ch04s04anf25.html Mode 9 should be in plane and it isn't on the attached file. It looks better when hex8 is being used with re…
    in WISH LIST Comment by apadzak August 2014
  • Hi Victor, I have another suggestion, wish... Is there any way to enable functionality of Mecway to select verstices and edges for loas or constraints in solids? I have seen test case of Abaqus which I tried to duplicate but instead of edges I had t…
    in WISH LIST Comment by apadzak August 2014
  • I know about GMSH in MECWAY but going straight away from an analysis in MECWAY to OpenFOAM for example with material specified, boundary conditions set or just regions of surfaces, elements, nodes gathered and named to be easy used. I think that mes…
    in WISH LIST Comment by apadzak July 2014
  • I have another tip. I believe that modern engineer/scientist/manufacturer can't work just on one type of software and then there is requirement for translations. CAD has got several formats available for data interchange but FEM isn't that straight …
    in WISH LIST Comment by apadzak July 2014
  • Iso surfaces can be scrolled in MIDAS as well. It doesn't have to work with scroll but could be used with the dragger for cutting plane in Mecway.
    in WISH LIST Comment by apadzak July 2014
  • Yes Victor, transparent solid and just iso surfaces coloured according to the scale. It is really fast and shows propagation of certain values.
    in WISH LIST Comment by apadzak July 2014
Default Avatar

Howdy, Stranger!

It looks like you're new here. If you want to get involved, click one of these buttons!

Sign In Register