Comments

• Hi Sergio, you are right, this is the problem. Thank you for the answer! I'll see if I can glue stuff together. Do you know if this limitation will ever be lifted? It certainly would make sense.

  in STEP model generated using Opencascade fails to open correctly Comment by jake November 2017
• As reference: the model looks like the attached pic in the pythonOCC native viewer.

  in STEP model generated using Opencascade fails to open correctly Comment by jake November 2017
• Sergio, the part can be modified by the guy who makes the 3D-stuff so it consists of one domain and then no contacts are necessary to hold them together.

  in modelling thin shells Comment by jake September 2016
• I know about the hexa mesher in Salome, but never really tried, the reason being licensing.http://www.salome-platform.org/downloads/license says: "Below listed products are included into SALOME distribution in a binary form only. These products requ…

  in modelling thin shells Comment by jake September 2016
• there seems to be some project to port: http://bluecfd.github.io/Core/2016/08/04/bluecfd-core-2016-1-ongoing-release/

  in modelling thin shells Comment by jake September 2016
• Hello Sergio, thank you for the fast answer! I attached an stp file. This is not the geometry I described above but shows the main features and proportins. Also, this file this doesn't mesh - must be healed if I remember correctly. The mesh I …

  in modelling thin shells Comment by jake September 2016